Tag: fix

Fixing the pebble smartwatch with the new 3D buttons (Kinda)

Fixed pebble2 smartwatch

Over the last few weeks I have switched from the Pebble Time watch which a friend gave me. To the slightly fixed button Pebble 2 watch. I finally tried decided to just go with superglue in strategic positions.

The buttons are 3D printed to fit without glue but they didn’t quite pop like described in the video which came with the buttons. I obviously didn’t watch enough as I assumed I would need to open the pebble watch to fit the buttons (no idea why I did this). The upside of this being not breaking the watch and understanding how to maybe replace the battery too.

So far its good although the pressure of pressing the buttons did crack the plastic and I had to re-glue it again in even tighter positions. But its generally staying put now. I’ll likely do similar for the other pebble which  has broken buttons.

Its a good fix as the watch battery is much longer lasting than the Pebble time, even with the HR sensor and other features turned on. Maybe a charge every 4-5 days currently.

I would certainly recommend the 3D printed buttons for those looking to extend the life of the pebble.

 

Pacemaker hard drive problems

Pacemaker fixing

It was always going to happen…

A portable dj device which I tend to walk around with while mixing to myself. I accidentally dropped while in the middle of recording a mix. Ever since its been acting a little weird and worst still crashing mid mix.

The song which seems to trigger the hard drive to start clicking happens to be JS16’s Rosegarden 2.0 ironically.

Anyway after 6+ years of use I think its about time I made some upgrades. The great thing about the pacemaker is its pretty much a Linux PC. So a lot of the upgrades should be pretty simple. Of course the pacemaker community can help with everything…

First the hard drive, going with my wired, tired, expired. Its time to move to a solid state drive. I only tend to use about 30gigs of my 120gigs of pacemaker storage. So I’m thinking about getting a 64gigs or even 32gigs… The drive as you can imagine is needs to be a 1.8inch drive, and needs to be ZIF/PATA rather than SATA. According to the post there are two different ZIF connections 0.2 mm and 0.3 mm, although its not clear which one I actually should get.

While I’m doing that I might as well do a replacement on the battery which lasts about a hour right now. Although I discovered I could charge the pacemaker over USB while using it if the USB is pure power and not a computer. Of course I also have the AC adapter but nothing beats having lots of battery power.

This looks to be better done in a workshop?

Thanks goodness the Pacemaker isn’t made up of custom hardware bits…

Time to fix up the scooter?

Honda Silverwing

Saw this picture and started thinking its about time I fixed my scooter to either use it or sell it… I do believe it will get warmer and there is almost nothing better than riding around in the summer breeze.

Now I just need to find a decent motorbike repair shop somewhere near the centre of Manchester? Any pointers would be useful…