A while ago I blogged about trying to replace the battery on the Sundia Diabolo LED kit.
Lots of friends tweeted me and helped.
I learned a lot including LiPo is always 3.7v and the configuration of the numbers which were faded out on the current battery. With that information I finally bought some batteries from ebay.
They took a while to come but I did a few rough tests and it seemed to work and then not work. So I left it, however I now know the reason why it was on and off is because of the wiring.
The wiring was small and trying to bind the wires with my large hands was always going to be a problem. In the end I finally got it hooked up and stripped the wires back further than originally planned. Once done, it was stable and I was able to make it work consistently.
What it really needs is soldering because lets be honest its going to be thrown around a lot and the impact on my black tapped connections will be high. Because of this, I’m considering adding foam or bubble wrap to the inside of the case to put less pressure on the inner elements. Ultimately they should be soldered and the battery stuck in place with something stronger than black tape.
Ironically I decided to get a fire diabolo, at long last. There is something about Fire which is much more impressive but infinitely more dangerous (in a good and bad way).
Update on the Sundia Diabolo LED
With the mess which kind of worked, I thought I need to talk to a professional about it. My good friend Jasmine was the natural choice, so with chocolate, a takeaway and some good conversation. Jasmine lent her professional eyes to the LED kit. Fixing everything so well, I was blown away with the results as you can see above!
Now thats how to fix the Sundia Diabolo LED kit!