Tag: tupplur

Which projector fits in my flat?

My home cinema setup

I love home cinema and the idea of a projector is one of those things I always wanted but couldn’t afford. A while ago I (well my friends wife did and I helped) put up a white Tupplur blind from IKEA. Then I bought a really cheap XGA projector.

It kind of works but I have to put the projector on the coffee table and quite high. As its XGA (1024×768) and not even WXGA (1280×768), the picture is cut off when playing a film and of course its analog inputs only which is a real pain. So finally its time to get a new projector.

This should be easy but I realise I might be asking for the impossible?

  • Full HD 1080p projector
  • HDMI inputs
  • Less than £500
  • The ability to beam 4 meters and fill but not over shoot a screen of about 2.55m diagonal (2.1m width x 1.45m height)

The last part is the biggest issue, the current projector over shoots the screen massively and the only way I can make it fit is with a telephoto lens I bought recently.

The macrolen attached to my old projector
Telephoto lens attached to my current projector

So I’ve been looking up throw distances, and it seems to be roughly the meters I want the projector away (4 meters) divided by the second number in the projectors ratio (usually something like 1:62). The number resulting is the width of the image.
For example the perfect number is 4 meters divided by a nice projector throw ratio like 1:1.9 gets you 2.1 meters at 4 meters distance.

Theres lots of projector calculators online, I’ve been using this one. They are great but when looking up projector prices in the UK, its always difficult to get the throw ratio. This is important because even if projector central can filter by throw and other things, the prices are all over the place.

The telephoto lens in effect

After much looking, comparing and searching (I’m surprised theres no way to compare this type of data easily actually, the best site I found for this is Projector Central which allows you to search based on key features). I decided to order the Optoma HD143X HDMI 3000.  I’ve decided to give it a try and be prepared to use a telephoto lens again to get the picture down to a reasonable throw size. Searching and comparing was eating up my time, when I should have been doing other things. So I’m glad that all done now and just happened to nab one as the price went up again. One of the online retailers had not changed their price quick enough, luckily for me.

Worst comes to worst, I could always get a bigger blind, setup a white sheet or just send it back and go looking again.

Fingers crossed it will fit perfectly, otherwise another trip to IKEA is on the cards.

The screen is kinda up or rather down?

Cubicgarden's home cinema

Thanks to a friend’s wife, we were able to get the IKEA tupplur projector screen up today (its really a 2 person job). On the evening I set the little panasonic projector back up and tried out Inception (what better?)

It works just as Ikea hackers and AV forums suggested and after another trip to IKEA, they finally had a extendable rod (they never had one previously) to pull the whole thing down. Unfortunally due to the change in living room layout, I can’t really have the projector on the bottom of the coffee table anymore (there is only so far keystone will go). But once positioned on top of the table and after dropping the resolution down to XGA instead of 1080p (the projector doesn’t really support anything over 1024×768 and tends to cut off the rest, but at least my Kodi machine outputs the same image to both outputs, meaning I don’t need to unplug or blank one screen each time)

So with all that in mind, there is one problem. The screen doesn’t seem to pull back up. This looks to be a problem that might mean refitting the screen again.

In the meanwhile, I’ll be standing on a the step ladder pulling the screen back up!