How I listen to podcasts in 2018

Me listening to podcasts in madrid

I had quite a bit of time to read and listen to podcasts during my holiday in Portugal and Spain. One of the posts I read was Adrian talking about current his tech stack.

But I thought it might be good to talk about how I finally sorted out my podcast setup as it includes many parts of my current tech stack.

I listen to podcasts and audiobooks quite a lot. If I was still using last.fm I could likely quantify exactly how much but through my setup I’ll reveal a rough number at the end.

Listening devices

I listen to podcasts in the morning via Xbian running on Raspberry Pi 2 (considering switching to rasplex but Yaste remote supports Plex and Xbian as a audio endpoint/upnp renderer) which I bought a long while ago. This is setup in my room via ethernet and connected to a small amp and stereo speakers, one in my bedroom and one wired into the bathroom. I decided to do this after trying Bluetooth and FM speakers but they were just too quiet or unclear. Nothing beats a dedicated non-battery device. The wiring could do with a clean up. The Raspberry Pi is also connected to a audio splitter with one going to a FM transmitter.

This broadcasts to my little micro-hifi in the kitchen which I got from ebay over 10 years ago; its handy for multi-room synced audio without messing around (although I considered using a Chromecast audio and other things). The small amp in my room is connected to a TpLink HS100 smart switch meaning I can turn it off when leaving easily and quickly. I have only set it up for local wifi access not remote access, because frankly why would I need to this?

When not at home I use Google Pixel 2, I decided to get the 128gig version because I had enough of dealing with space issues. I have plex client installed and I have a plex pass (life time subscription), so can sync podcasts and audiobooks with ease. I do have it on my Nexus 7 and 5x too, but don’t carry them around much. I find Plex client is pretty good and doesn’t eat too much battery. Syncing seems seamless but with offline support sync support and 12gig of mobile 4G data. Because its using Plex at the backend, plex will save position no matter what device, as I’m logged in using the same account.

I also have Chrome Plex client on my laptop, meaning I can keep on listening when at work. Yes I listen to podcasts and audiobooks while working. I know many find this unthinkable but it works for me.

Plex Media Server

I’ve had Plex mediaserver running for quite a long time now and the advantages of having a gigabit internet connection and decent vpn (zerotier) means I can stream, sync or download podcasts and audiobooks without any fuss to my own devices. Plex media server keeps the position and checks for updates to the server filesystem.
Plex indexes the podcasts and audiobooks as audio and with some tweaking works quite well, although it can get confused when podcasts numbering and dates. It would be great if it had a audiobook and podcast indexer to pull much more metadata.

Podcatching

Unfortunately Plex media server doesn’t actually support podcasts which would be great if it did but its a pain to get working and not worth it for me. Especially because I have a complete Ubuntu stack its running on.
Because of this I use to download the podcasts from the web using a native ubuntu app. I tried Gpodder and Rhythmbox but they were resource hungry when downloading 30+ podcasts. Then tried VLC but it seemed over kill just to download podcasts. So tried some command line programs including Podfox and podcatcher. In the end I used Podget then setup a cron to trigger it every 2-4 hours. I also have Podget clean up the podcasts every 3 months.

One of the biggest things which drove me nuts was adding and updating rss feeds. Someone says you listen to the guilty feminist podcast, and would have to update server configs, etc. But using my Tiny tiny RSS install, I now have all the podcasts added to the master subscription list and generate a custom RSS feed aggregated for podcasts. I add the generated feed to Podget and the next time its updated, it will automatically add new items.

Because its done via TTRSS, it means I can add & remove the feed via any TTRSS client including the one my phone or using the web interface via my VPN (I only expose the web interface that way).

Small pieces loosely joined

It sounds like a lot of work but honestly it works well and means I can remove a part of it and it will still work. Remove Podget, could be replaced with anything including VLC, etc. Plex could be replaced with Emby or another mediaserver. TTRSS could be anything self-hosted. Using Plexpy to log is under my own terms and the data is only shared and useable by me.

I do wish I could get to this type of space with so much more of the services I use. Right now, I’m quite impressed with how smooth everything works.

Looking forward

I’m looking at a way to tag and generate a feed out of the tags in TTRSS, instead of adding it to a hierarchy. Sometimes a feed could fit between two or more places. I’d also like to improve plex’s indexing around podcasts and audiobooks. Podget generates a m3u playlist file but not found much use for these yet. I also wish the plex input for kodi was less heavy.

I just added the Recode podcast while writing this post and I looking at my plex client on my Pixel 2. Podget downloaded all the episodes over my gigabit connection in about 6mins flat, the podget won’t remove them till a few months old but I can easily remove them via plex or directly from the file system over the VPN.

As promised, looking at Tautulli (what use to be PlexPy). Over the last 3 weeks I had 83 plays or 22 hrs 14 mins of playback.  The last podcast I listened to while on the Madrid Metro to the airport at 7:30am was Rob Reid’s Always on podcast – Episode 23: Rodney Brooks | Robotics & AI – Their Present & Future

Not enough detail?

If you are interested in any detail, just comment or tweet me for more info.

 

Data & stats from Plex Mediaserver

A while ago I wrote about having so much bandwidth from hyperoptic gigabit broadband, means I can now share my media collection with friends.

Its great but its interesting looking at the data my friends are generating through their use of my sever. But it’s not all super smooth, mainly due to my poor single core AMD Sempron 2800 processor doing transcoding on the fly. The biggest problem is the Xbox Plex client, which we discovered doesn’t support x.264 at all, meaning transcoding the whole thing is the only way to view anything. My poor CPU maxes out at 100% during the whole thing. This seems to be a massive bug bear for many people out there… I dread to think what happens with H.265 encoded media.

I installed PlexPy a while ago and decided it was time to have a look.

plexpy Screenshot from 2016-04-042

The Chromecast isn’t anywhere as bad but still triggers transcoding, but to be fair I’ve not really played with the settings but I think theres a way to force the chromecast to play directly (Directstream). Some Smart TVs seem quite happy to take the direct stream putting absolutely no strain on my CPU.

plexpy Screenshot from 2016-04-041

Because of the strain on my CPU, I’m considering changing my CPU to something better. I mean even a quad core or six core processor would be ideal.

Although part of me is thinking maybe I should block all client which require transcoding, or maybe just block the Xbox Plex client. This doesn’t seem to be a problem with the Sony Playstation, from first tests. But I also wonder about DTS, MKV and h.265?

plexpy Screenshot from 2016-04-045

I mean its not like its heavily used anyway. Sure my one friend will like that (smile). The Chromecast is far and away the biggest client and we tried the Xbox 360 once just to see if it was any better (which it wasn’t)

plexpy Screenshot from 2016-04-044

The other stats generated are quite interesting to look at…
For example when most of my friends watch my media by hour of the day and which day.

plexpy Screenshot from 2016-04-043

Theres much more interesting stats but of course privacy of my friends is the up most importance. Maybe I should craft a EULA (End User Licence Agreement)?

Its really interesting to think about the ethics of data when you are the provider.